Feature requests
245 results found
-
ability to fill previous document timeline after loading new tracker plugin (by clicking a button or something like that)
for example, i wrote a plugin for Autodesk Motionbuilder, the ProcessName is 'motionbuilder', and the Application Name showed in ManicTime is 'Autodesk Motionbuilder'.
when i click a button, manictime let me select a tracker plugin and an Application. then search the recorded Application infos, apply the string split rules to and get Document info. finally fill them into previous Document timeline3 votesNot enough votes.
-
Option for Day Timeline to flow vertically
The program I use to enter my time uses a top down 9 - 5 display that I cant change, hopefully this is something that can be done on this side :)
1 voteNot enough votes.
-
Extend/Shrink start/end of a selected tag using keyboard shortcut
Extend/Shring start/end of a selected tag using keyboard shortcuts.
When selecting a tag on timeline, If I need to extend/shrink its start/end to a specific point in time, the normal way to do this is to mouse drag the start/end edge to the desired point on the timeline.It would be more easier and efficient if there exist the following keyboard shortcuts:
- keyboard shortcut to move (extend/shrink) the selected tag's start edge to the current mouse's position on the timeline and another one for the end edge.
- keyboard shortcut to extend the selected tag's start edge to the…3 votesNot enough votes.
-
Custom title: Easier creation / sharing and application to past data (of limited range, e.g. past 7 days)
It would be great if the CustomTitle.txt feature would get a community source so that not every user has to re-invent the wheel and has to write a regex for every application.
Similar to the plugin management, a searchable online repository that can be used to add lines to CustomTitle.txt would be great, with an online suggestion feature to add new entries.
Please also keep the plaintext file and openness of this feature even with this addition.Similarly, it would be great to apply new CustomTitle.txt document/application regex rules to the recorded data of the past 7 days.
3 votesThis is a post suitable for an online forum like reddit. Please refer to the ManicTime thread for posts like this.
-
Minimal time for AutoTag entry
Some activities that are auto tagged by location are taking more time in reality. So it would be great to be able to set a minimal value for auto expanding the time into it, or some padding values (+/- 3 minutes). For example my commute is always measured by the time that my vehicle is in movement (about 6 minutes), however, I'd like to automatically add to that time 3 minutes before and after the movement for the preparing, as it takes time to pack, to take my vehicle out of the garage, etc.
3 votesNot enough votes.
-
Monitoring of applications running in the background (applications of our choice)
I am listening to music on Spotify but something else is open on my window screen.
Therefore, the application cannot detect the Spotify application running in the background.
Since we cannot monitor all background applications, in fact, if we select certain programs in the settings section and then say watch even if these programs run in the background, we can watch the applications we want running in the background.
I am waiting for your comments in this way.
1 voteWould add a lot of complexity, not enough votes.
-
Track "(Not Responding)"
Identify "(Not Responding)" text appended to window label when a given program freezes/hangs.
1 voteNot enough votes.
-
Anyone interested in a FF extension that prepends the current container to the window title?
I've created a quick and dirty FF extension that will essentially do the above. I use ManicTime + Multi-Account Containers + Simple Tab Groups -- and that's been pretty good to keep a sprawling bunch of tabs in check, and has worked fairly well with ManicTime to autotag. However, I was really wanting to be able to autotag based on the current tab's container rather than just the group I was currently in.
For instance: have one tab group that represents an MSP I contract to with multiple tabs for their different clients open in that group in their own…
1 voteMore of a post for a reddit thread rather than a feature request.
-
Updated the French language of Manictime
Hello
I come to you to know how to update the French language up to date
I have the fr.txt file but I don't know which new sentences need to be updated?
If you can send me the new file to translate I do you with pleasure
Have a nice day
Kind regards1 voteTranslations will now be updated in every release.
-
Ask for a label when I start a program
Ask for a label when I start a program
3 votesNot enough votes
-
Adding a "tentative" attribute to tags that are entered in advance
It would be nice to be able to use ManicTime to plan my day as well. As it is now, I use a separate tool for planning what I'm going to do, and then transfer over all the tasks into ManicTime to track them. You can currently add tags for future work, but these estimates may end up being incorrect. And when you go back to manic time, there is no way to tell which tags you entered after working on them and which tags were entered before starting them. Allowing users to enter tags for future work, and not…
3 votesNot enough votes, too much added complexity with confirming, adding a note that the tag is tentative is a viable workaround.
-
ManicTime Version 2023.1.1.0 should start
When I try to start the program, it should not give me this error.
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types.
Could not load file or assembly 'Microsoft.AspNetCore.Http.Abstractions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'. The system cannot find the file specified.
Could not load file or assembly 'Microsoft.AspNetCore.Http.Abstractions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'. The system cannot find the file specified. (LoaderExceptions: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AspNetCore.Http.Abstractions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'. The system cannot find the file specified.
File name: 'Microsoft.AspNetCore.Http.Abstractions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'; System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AspNetCore.Http.Abstractions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60'. The system cannot find the…3 votesError reports are sent through the client or to support.
-
Google Maps Location History or KML Import
KML with specified location data is generated via a standard URL. This url downloads the past 24 hours by default but can be fed additional info to get more https://www.google.com/maps/timeline/kml
More info: https://github.com/JanLauGe/Maps-Location-History
I could see it importing directly but even if there was just a way to import a KML that would probably be helpful.
1 voteNot enough votes
-
Autotag time duration can be calculated from data (and appended to Notes)
Dynamic autotags are great. I use them to append into my Notes information about actual filenames, so I can more easily generate timesheets which I then review and revise to explain to clients what I was doing during the 3.3 hours (for example) that I was working on their matter. It would be helpful if the filename in the Notes could also have a duration added afterwards (perhaps in brackets), so that I can easily assess what I spent more time on as compared to other files.
I know this won't be completely accurate, and I'm not looking to completely…
4 votesAsked for more details, did not receive them
-
Screenshots
Protect Screenshots on disk with a Password
1 voteNot enough votes. Screenshots are stored in a folder, you can probably use other tools to additionally encrypt a folder.
-
Take screenshot on every tab switch - Applications are more and more becoming tabs
Take screenshot on every application switch is very useful, but I am running more and more 'applications as tabs' in Chrome, so the 'on application switch setting' misses more detail than I would like.
I use this feature to go back in time and recover data, see what was happening at a given time. Storage is not a concern for me, granularity is. I end up setting my screenshot interval to 15 or 30 seconds, but still miss important details at this level for certain 'way back machine' type use cases.
Seems like an relatively easy add, just add a…
3 votesnot enough votes
-
Enhancements to Advanced Search
- When opening Advanced Search, please show the last used date in the start date of "Date between"
- Consider allowing saving custom date ranges
- Automatically activate "Date between" when any of the date fields or the "Custom field" are clicked (avoids an unnecessary mouse click)
3 votesNot enough votes
-
google voice
Timeline for Google Voice activity including calls and text messages separately.
4 votesnot enough votes
-
Are there any plans to develop ManicTime Mac even further?
I initially thought the ManicTime Mac app was just something with no client interface and I can at least turn on the stopwatch and add a tag to the server. But it appears I cannot? It seems counterproductive to tag certain activity in the Mac later as I'll have to zero in on the parts where actual work was done.
Will there be improvements in the not-so-distant future? Thanks!
3 votesCurrently we are working on cloud/Mt Server interface, so more or less anything which can be done on Windows version can be done on web UI.
-
Screenshot pop-up window: pin to always on top
I like that I can now pop-out the screenshot pop-up window, but I would like this window to be 'pinnable' so that it stays on top of ManicTime while I am clicking back and forth, doing my timesheets.
1 votenot enough votes
- Don't see your idea?